SPE Manifold
Square Cylinder SPE Manifold
Matching 20 μm clean polyethylene frit, which is suitable for every specification of column tube, customized product services are also available.
1. The vacuum glass gas chamber is convenient for real-time monitoring of the extraction process, and can be autoclaved and sterilized at 121℃.
2. Use vacuum gauge and exhaust valve to optimize flow rate of sample.
3. Equipped with support plate of various Pore sizes to meet most sampling tubes, the support frame of multiple gears can freely adjust the height of the support plate.
4. Equipped with a tray to protect the glass air chamber and prevent wearing in the base.
Technical parameters
A. 12 or more independent valves
B. Anti-atomizing glass vacuum tank (imported from abroad)
C. Glass vacuum tank pressure ≤66 Kpa
D. Size: 195*100*170/mm (12 ports) 295*100*170/mm (24 ports)
E. Test tube size: less than the standard 16 mm
F. Inlet pressure: <0.1 MP
G. Suitable for: test tube/centrifugal tube/sample bottle, etc
H. Net weight 3.5 kg (12 ports) 6 kg (24 ports)
I. Relative humidity: <85% RH
J. Standard number of ports: standard 12/24 ports
Manifold list
a. 4 cover plate support rods
b. 12 or 24 flow rate control valves (Stopcock).
c. 1 pressure vacuum gauge
d. 12 positioning C type clamps of test tube holder