
Normal/Reversed Phase Columns
P/N: H00222-21021
Ultisil F-C8, 3μm, 3.0×100mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21020
Ultisil F-C8, 3μm, 3.0×75mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21019
Ultisil F-C8, 3μm, 3.0×50mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21018
Ultisil F-C8, 3μm, 3.0×30mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21016
Ultisil F-C8, 3μm, 2.1×250mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21015
Ultisil F-C8, 3μm, 2.1×200mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21014
Ultisil F-C8, 3μm, 2.1×150mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21012
Ultisil F-C8, 3μm, 2.1×100mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21013
Ultisil F-C8, 3μm, 2.1×125mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21011
Ultisil F-C8, 3μm, 2.1×75mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21010
Ultisil F-C8, 3μm, 2.1×50mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21068
Ultisil F-C8, 3μm, 2.1×33mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H00222-21009
Ultisil F-C8, 3μm, 2.1×30mm
Ultisil F-C8 is a fluorinated C8 reversed-phase column, where fluorine atoms replace hydrogen atoms on the RP stationary phase, containing a total of 17 fluorine atoms. It exhibits distinct selecti...
P/N: H02641-21108
Ultisil F-C8, 5μm, 30×250mm, 120Å
Welch preparative column uses the same packing materials as does analytical column, to ensure the best reproducibility of analysis and preparative scale. Special packing technique and stainless mod...
P/N: H02641-21106
Ultisil F-C8, 5μm, 21.2×250mm, 120Å
Welch preparative column uses the same packing materials as does analytical column, to ensure the best reproducibility of analysis and preparative scale. Special packing technique and stainless mod...
P/N: H02641-21102
Ultisil F-C8, 5μm, 10×250mm, 120Å
Welch preparative column uses the same packing materials as does analytical column, to ensure the best reproducibility of analysis and preparative scale. Special packing technique and stainless mod...
P/N: H00211-31044
Ultisil Amino Acid, 5μm, 4.6×300mm
Since most amino acids have no absorption or only weak absorption in the ultraviolet region, in order to improve the sensitivity and separation selectivity, amino acids need to be derivatized so th...
P/N: H00211-31043
Ultisil Amino Acid, 5μm, 4.6×250mm
Since most amino acids have no absorption or only weak absorption in the ultraviolet region, in order to improve the sensitivity and separation selectivity, amino acids need to be derivatized so th...
P/N: H00278-31044
Ultisil OAA, 4.6×300mm
Ultisil OAA is a dedicated reversed-phase column developed by Welch Materials for the detection of water-soluble organic acids. It is designed for efficient and high-throughput organic acid analysi...
P/N: H00279-31044
Ultisil Amino Acid Plus, 4.6×300mm
Ultisil Amino Acid Plus column is a dedicated column which through further optimizing the analysis method on the basis of the original column for amino acid analysis. It uses an evaporative light s...
P/N: H00215-41043
Ultisil Polar RP, 10μm, 4.6×250mm
Ultisil Polar RP is a reversed-phase column with selectivity distinct from conventional C18. It incorporates embedded polar groups, allowing the alkyl phase to remain solvated even in highly aqueou...
P/N: H00215-41036
Ultisil Polar RP, 10μm, 4.6×30mm
Ultisil Polar RP is a reversed-phase column with selectivity distinct from conventional C18. It incorporates embedded polar groups, allowing the alkyl phase to remain solvated even in highly aqueou...
P/N: H00215-41067
Ultisil Polar RP, 10μm, 3.9×300mm
Ultisil Polar RP is a reversed-phase column with selectivity distinct from conventional C18. It incorporates embedded polar groups, allowing the alkyl phase to remain solvated even in highly aqueou...
P/N: H00215-31051
Ultisil Polar RP, 5μm, 7.8×250mm
Ultisil Polar RP is a reversed-phase column with selectivity distinct from conventional C18. It incorporates embedded polar groups, allowing the alkyl phase to remain solvated even in highly aqueou...
Column Specifications
C18 Columns
Series | Column | pH Range | Max Temperature | Max Pressure Tolerance |
Ultisil Series | Ultisil LP-C18 | 0.5-8.0 |
70 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa (≥5 μm) 60 MPa (<5 μm) |
Ultisil LP-Aq | 1.0-8.0 | |||
Ultisil XB-C18 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
||
Ultisil AQ-C18 | 2.0-8.0 | |||
Ultisil Plus C18 | 2.0-8.0 | |||
Ultisil Alk C18 | 2.0-8.0 | |||
Ultisil PAH | 2.0-8.0 | |||
Ultisil Polar RP | 2.0-8.0 | |||
Ultisil ODS-3 | 2.0-8.0 | |||
Ultisil XS-C18 | 2.0-8.0 | |||
Ultisil Plus LP-C18 | 0.5-8.0 | |||
Xtimate Series | Xtimate C18 | 1.0-12.5 |
70 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa (≥5 μm) 60 MPa (<5 μm) |
Xtimate Polar RP | 1.0-12.5 | |||
Blossmate Series | Blossmate C18 | 2.0-8.0 | 60 °C | 40 MPa |
Blossmate Aqs C18 | 2.0-8.0 | |||
Blossmate ST-C18 | 1.0-11.0 | |||
Topsil Series | Topsil C18 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa |
Welchrom Series | Welchrom C18 | 2.0-8.0 | 60 °C | 40 MPa |
Welchrom Vantage C18 | 2.0-8.0 | 60 °C | 40 MPa | |
Boltimate Series | Boltimate C18 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
60 MPa |
Boltimate EXT-C18 | 1.5-12.0 | |||
Boltimate LP-C18 | 1.0-8.0 |
C8, C4, C3, C1 and Phenyl Columns
Series | Column | pH Range | Max Temperature | Max Pressure Tolerance |
Ultisil Series | Ultisil XB-C8 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa (≥5 μm) 60 MPa (<5 μm) |
Ultisil LP-C8 | 1.0-8.0 |
70 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
||
Ultisil F-C8 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
||
Ultisil Plus-C8 | 2.0-8.0 | |||
Ultisil XB-Phenyl | 2.0-8.0 | |||
Ultisil Phenyl-Ether | 2.0-8.0 | |||
Ultisil PFP | 2.0-8.0 | |||
Ultisil Plus-phenyl | 2.0-8.0 | |||
Ultisil XB-C4 | 2.0-8.0 | |||
Ultisil LP-C3 | 1.0-8.0 |
70 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
||
Ultisil XB-C30 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
||
Ultisil XB-C1 | 2.0-8.0 | |||
Ultisil XB-CN | 2.0-8.0 | |||
Ultisil LP-CN | 1.0-8.0 | |||
Xtimate Series | Xtimate C8 | 1.0-12.5 |
70 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa (≥5 μm) 60 MPa (<5 μm) |
Xtimate Phenyl-Hexyl | 1.0-12.5 | |||
Xtimate C4 | 1.0-12.5 | |||
Blossmate Series | Blossmate C4 | 2.0-8.0 | 60 °C | 40 MPa |
Blossmate Phenyl | 2.0-8.0 | |||
Topsil Series | Topsil C8 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa |
Topsil phenyl-Hexyl | 2.0-8.0 | |||
Topsil CN | 2.0-8.0 | |||
Welchrom Series | Welchrom C8 | 2.0-8.0 | 60 °C | 40 MPa |
Boltimate Series | Boltimate C18 | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
60 MPa |
Boltimate Phenyl-Hexyl | 2.0-8.0 | |||
Boltimate EXT-C18 | 1.5-12 | |||
Boltimate EXT-PFP | 1.5-10 | |||
Boltimate HILIC | 2.0-8.0 | |||
Boltimate LP-C18 | 1.0-8.0 | |||
Boltimate C8 | 2.0-8.0 | |||
Boltimate Phenyl | 2.0-8.0 |
Normal-Phase Columns
Series | Column | pH Range | Max Temperature | Max Pressure Tolerance |
Ultisil Series | Ultisil SiO2 | 2.0-8.0 |
70 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa (≥5 μm) 60 MPa (<5 μm) |
Ultisil Diol | 2.0-8.0 | |||
Ultisil XB-NH2 | 2.0-8.0 | |||
Ultisil XB-CN | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
||
Topsil Series | Topsil Silica | 2.0-8.0 |
60 °C (mobile phase pH ≤6.5), 40 °C (mobile phase pH >6.5) |
40 MPa |
Topsil NH2 | 2.0-8.0 |
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device