| Column | WEL-1301(30m*0.53mm*1.8um)（P/N：01905-52004） |
| Detector | FID |
| Injection port temperature | 300℃ |
| Detector temperature | 300℃ |
| Carrier gas | N2 |
| Split ratio | 1:1 |
| Column flow | 5 ml/min |
| Injection volume | 1 μL |
| Temperature program | The initial temperature was 100°C, maintained for 1 minute, and the temperature was increased to 230°C at a rate of 10°C per minute. Hold for 10 minutes. |
If you have any problem or require further information, please contact info@welchmat.com.
0 Comments