| Column | WM-5 (30m*0.32mm*5um)（03902-32010） |
| Detector | FID |
| Injection port temperature | 240℃ |
| Detector temperature | 250℃ |
| Carrier gas | N2 |
| Split ratio 8:1 | 8:1 |
| Column flow | 1.5ml/min |
| Injection volume | 0.2μL |
| Temperature program | The initial temperature was 35°C, maintained for 7 minutes, increased to 50°C at a rate of 5°C per minute, and then increased to 200°C at a rate of 30°C per minute, maintained for 5 minutes. |
If you have any problem or require further information, please contact info@welchmat.com.
0 Comments