Mixed control solution

Column | Ultisil®C18(4.6×150mm,5μm) |
Mobile Phase | Mobile phase A: take 2G sodium dodecyl sulfate, add 1000ml Wahaha water to dissolve it, then adjust the pH to 2.0 with phosphoric acid, mix well, filter by suction, and degass by ultrasonic. Mobile phase B: take chromatographic grade acetonitrile and Degas by ultrasonic. Mobile phase A / mobile phase B = 60 / 40 |
Detection | 200nm |
Temperature | 30℃ |
Flow Rate | 1.0ml/min |
Injection Volume | 5ul |
Note | / |
If you have any problem or require further information, please contact info@welchmat
0 Comments