| Column | WM-InoWAX （30m×0.25mm，0.25μm)（P/N：03909-22001） |
| Temperature | See the table below for details |
| Injector | 250℃ |
| Detector | FID 250℃ |
| Carrier gas | Nitrogen |
| Flow rate | 1.0mL/min |
| Split ratio | 10-1 |
| Injection volume | 5μL |
| Hydroge | 30mL/min |
| Air | 300mL/min |
Temperature:
| Rate (℃/min) | Temperature (℃) | Retention time (min) |
| 50 | 1 | |
| 20 | 200 | 3 |
| 25 | 240 | 20 |
If you have any problem or require further information, please contact info@welchmat.com.
0 Comments